Cement mix Tekno Ad

Tekno Ad is a special cement mix that promotes adhesion of the old concrete with a new surface, contains corrosion inhibitors.

Applications:

• in large engineering structures (subway, highway, tunnel, dam)
• in the repair and strengthening of concrete surfaces
• to prevent corrosion in reinforced concrete structures

Advantages:

• has a high mechanical strength
• has high adhesion to concrete and reinforcement
• protects rebar from moisture
• easy to apply
• non-toxic

Instructions for use:

Surface for application should be cleaned from any oils, rust, detergents and other substances that prevent adhesion. Before application the surface should be moistened.

Kneading is performed using a low speed mixer, gradually adding the mixture in a container of water for 5 minutes, stand the solution for 3 minutes and mix again to obtain a homogeneous mixture. Applied to the surface using a roller or automated spray. To use the solution you need within the hour.

Notes on application / Limitations

• not to add to the solution of other components
• after application, the surface must be protected from exposure to adverse weather conditions and air temperature above 35C
• after use, the equipment should immediately after use
• may cause irritation to skin, use protective gloves, goggles and masks while working.