Two-component adhesive quick actions for stone, marble and granite based on unsaturated polyester resin - Teknobond 220. Specially designed for fastening items of marble and granite to each other and vertical fixing plates made of marble on the external surfaces of buildings.
Applications:
When using marble and granite for:
Features and benefits:
Instructions for use:
To remove the weak surface layer of marble, granite or concrete, using a wire brush. Mix the resin and hardener in a container until a homogeneous mass. 3% hardener (relative to the weight of the resin) and mix with resin. If the weather temperature is low, use 1-2% of the curing agent relative to the mass of the resin. Kneading to spend over a period of ≤1 minute. Then immediately apply the mixture on the marble and press it to the surface.
For mixing use a clean plastic or metal plate, and flexible spreader putty.
Color |
Beige |
Density |
1,75 ± 0,05 gr/Ml |
Packaging |
1200 g kit with hardener |
Storage conditions |
9 months from date of manufacture in unopened original packaging |
The life time of the mixture with 3% of curing agent |
2-3 minutes (20°C) |
Complete drying |
7 days |
Hardness (shore — D) (24 hours) |
>75 |
Temperature range of application |
5°C to 35°C |
Adhesive force (to concrete) |
>2 N/mm2 |
Mix ratio |
3% hardener by weight of resin |