Manual keys for flexible rebar

Directory > Afacan Tools

Key for flexible rebar AFACAN 10A

The manual key is used for bending of reinforcement steel in the composition of the assembled structure, with a diameter of 10 mm.

Key for flexible rebar AFACAN 12A

The manual key is used for bending of reinforcement steel in the composition of the assembled structure, with a diameter of 12 mm.

Key for flexible rebar AFACAN 14A

The manual key is used for bending of reinforcement steel in the composition of the assembled structure, with a diameter of 14 mm.

Key for flexible rebar AFACAN 16A

The manual key is used for bending of reinforcement steel in the composition of the assembled structure, with a diameter of 16 mm.

Key for flexible rebar AFACAN 18A

The manual key is used for bending of reinforcement steel in the composition of the assembled structure, with a diameter of 18 mm.

Key for flexible rebar AFACAN 20A

The manual key is used for bending of reinforcement steel in the composition of the assembled structure, with a diameter of 20 mm.

Key for flexible rebar AFACAN 22A

The manual key is used for bending of reinforcement steel in the composition of the assembled structure, with a diameter of 22 mm.

The key to flexible valves 24A AFACAN

The manual key is used for bending of reinforcement steel in the composition of the assembled structure, with a diameter of 24 mm.

The key to flexible valves 26A AFACAN

The manual key is used for bending of reinforcement steel in the composition of the assembled structure, with a diameter of 26 mm.

Key for flexible rebar AFACAN 28A

The manual key is used for bending of reinforcement steel in the composition of the assembled structure, with a diameter of 28 mm.

Key for flexible rebar AFACAN 30A

The manual key is used for bending of reinforcement steel in the composition of the assembled structure, with a diameter of 30 mm.

Key for flexible rebar AFACAN 32A

The manual key is used for bending of reinforcement steel in the composition of the assembled structure, with a diameter of 32 mm.

Manual keys are used for bending of reinforcement steel in the composition of the assembled structure, when there is no possibility to transfer it to the machine.