Bitumastic Izoplast B

Directory > Materials for waterproofing

Bitumastic Izoplast B

Bituminous mastic with high penetrating ability, creates a highly resistant waterproofing coating.

1117
uah
x
bucket
=
1117 uah
Wholesale price 949.45 uah from 20 bucket

For you, there will be a greater sense of the price of the proposition. Be affectionate, send a request and managers create an individual prorachunok for you.

CHECKOUT

Введите свои данные

Izoplast B - bituminous grout with special additives and high penetrating properties, based on organic solvent. To create a highly resistant waterproofing coating.

Applications:

  • Waterproofing of pipes and manholes, concrete rings, pump stations
  • Waterproofing of concrete bases / foundations, ties, fences, columns and pillars
  • Seamless waterproofing vertical and horizontal surfaces
  • Waterproofing with high resistance to aggressive media
  • Preservation and waterproofing

Advantages:

  • Easy to use
  • Covers all the cracks in the Foundation
  • For industrial and residential construction
  • For roofing of any bias
  • Resistance to weak acids and salts

Instructions for use:

Prior to use mix. Apply paste with a brush or roofing brush. Apply the next layer after drying the previous one. Waiting time before laying the second layer of waterproofing composition IZOPLAST B is about 8 hours. In the presence of cracks (for concrete surfaces) IZOPLAST B can be diluted with an organic solvent for increasing the adhesion of material to the surface.

For waterproofing of basements and other underground parts of the building: apply 2 to 3 layers on dry primed concrete surface depending on the anticipated water load.

For the restoration and improvement of a sealing covering of roofs: apply at least 2 layers of emulsion on the prepared base. To increase the service life of the coating on the fresh finish layer of emulsion should be applied with mineral aggregate.

Remarks / Restrictions:

Store in tightly closed original containers, inaccessible to children, protected from direct sunlight, sources of heat and ignition. May be transported by any mode of transport.

Work with IZOPLAST R to hold in calm weather without precipitation at ambient temperatures from 5 °C to 25 °C.

At performance of works observe safety rules when working with organic solvents, the use of efficient ventilation and mask with filter for organic vapours.

In case of poisoning to provide the victim with fresh air, first aid, doctor-on-call.

Do not use IZOPLAST R inside residential and public buildings, and other facilities intended for permanent residence and finding people. Material must not come into direct contact with food or drinking water.

The product is flammable. Irritating to eyes and skin. Vapours may cause drowsiness and dizziness. Do not breathe fumes. Avoid contact with skin and eyes. Use only in well-ventilated areas.

Composition

Bitumen-rubber emulsion water based

Packaging

A bucket of 20 kg.

Drying time

≤ 8 hours

The density of the emulsion

0,985-1,015 g/cm3

The flow (first layer)

0,8-1,2 kg/m2

Flow (next layers)

0,6-0,8 kg/ m2

The water content

≤ 0,5 %

Application temperature

from - 5 °C to 25 °C

The temperature of the fire

200 °C

Dry mass residue

80 %

Product publications

A detailed description of the Izoplast R primer and mastic Izoplast B
A detailed description of the Izoplast R primer and mastic Izoplast B

Apply a bitumen-rubber primer Izoplast R and bitumen-rubber mastic Izoplast B best in tandem.

Read article
 Bitumastic Izoplast B

Other products