Acrylic waterproofing Teknomer 300

Directory > Materials for waterproofing

Acrylic waterproofing Teknomer 300

One-component elastic waterproofing material based on acrylic resin.


Введите свои данные

One-component elastic waterproofing material based on acrylic resin Teknomer 300.


  • water tanks and swimming pools
  • sloped roof terraces
  • for rooms with high humidity (bathrooms and showers, balconies, terraces and cellars)
  • for facades of industrial and residential buildings
  • for surfaces of concrete, galvanized metal, polyurethane coatings, PVC cornices


  • features high flexibility at low temperatures
  • highly resistant to cracking
  • has good adhesion to many materials
  • prevents carbonation in concrete
  • easy to apply
  • the finished surface can be painted or decorate tile materials

Usage instructions

Surface for application should be cleaned from any oils, rust, detergents and other substances that prevent adhesion. If there are areas in the form of cracks, cavities on the surface - they must be repaired using the easy cement mixes Teknorep 300 and Teknorep 300 EX. The corners and joints surface application should be sealed elastic adhesive tape for sealing construction joints Teknomer Pah Band 120/70.

Notes on application / Limitations

  • For maximum quality characteristics of the surface after applying Teknomer 300 trim tile, ceramics or other materials must be conducted no earlier than 3 days.
  • Do not use this material in adverse weather conditions
  • Do not use the material on the surface, which has a risk of freezing within 24 hours after application
  • Before use, you must mix the contents of the container during 5 minutes to a homogeneous mixture using a low shear mixer
  • Applied to wet the surface with brush, roller and/or scraper
  • Depending on the absorbency of the substrate, Teknomer 300 can be diluted with water to 50%, to obtain a primer solution. If desired, as the gain between the layers, you can use the fiberglass mesh. The waiting time between layers is at least 5 hours.
  • Each subsequent layer should be applied perpendicularly to the previous
  • After application the surface must be protected from adverse weather conditions such as direct sunlight, strong wind, high air temperature (above 35 ° C), rain and frost.
  • Equipment should be rinsed with water immediately after application.




20 kg bucket

Shelf life

12 months in dry environment in unopened container

Time use

> 3 days

Applying the second layer

5 hours

Ready to use

14 days


1.53 kg/m2 (at a thickness of 1 mm)

Adhesive force

1 N/mm2

Temperature resistance

(25 ° C) – ( 80 ° C)

Penetration into cracks

≥ 2.5 mm


200-300 %