Waterproofing mixture Teknomer 200 EX

Teknomer 200 EX - two-component flexible waterproofing and protective material. Forms a seamless flexible waterproofing coating. Creates protection from leaks and penetration of surface waters. Consists of powder component based on cement, the liquid component, based on acrylic and special additives that enhance the workability and water-resistant surface coating.

Applications:

• the foundations of buildings
• tunnels and lift shafts
• basement floors, basements, balconies
• baths, saunas, swimming pools and water tanks
• showers and bathrooms
• engineering structures (subway, tunnels, dams, highways)

Advantages:

• can be applied manually or by spray
• does not shrink and crack
• can be applied on fresh screed and concrete surfaces
• prevents carbonation in concrete.
• non-toxic, suitable for indoor use and potable water tanks
• may be in contact with salt water.

Recommendations for the use of

• Care must be taken not to damage the insulating material in the coating process.
• Do not apply on surfaces made of wood, metal and hardboard, MDF, plywood, PVC.
• Not to add to the mix other components.
• To achieve the maximum protective characteristics, subsequent work on the surface should be carried out not earlier than 72 hours.
• After application the surface should be protected from direct sunlight, strong wind, high (above 35 ° C) and negative temperature and precipitation.
• Equipment should be rinsed with water immediately after application. After the product hardens, it can be cleaned only by mechanical methods.

Usage instructions

Teknomer 200 EX after thorough mixing in 3-5 minutes is applied to a wet surface with a brush or spatula. After applying the first material layer, the second layer is applied in the vertical direction of application of the 1st layer.