Acrylic emulsion 100 Teknokür

Teknokür 100 - solvent free water emulsion acrylic, prevents the evaporation of moisture from fresh concrete. It forms an invisible impermeable to water vapor film, contributes to the preservation of fresh concrete the moisture for complete hydration of concrete.

Scope

• Parking lots, warehouses of materials, factories, shopping malls.
• Runways, highways, sidewalks, bridges, tunnels
• Other concrete surfaces that need to delay the evaporation of water.

The features and benefits

Effectively protects the concrete surface from exposure to weather conditions (sun exposure, wind and rain).

• Increases the frost resistance of concrete.
• Can be applied on all types of concrete surfaces.
• Reduces cracks resulting from shrinkage.
• Reduces risk of shrinkage and cracking.
• Improves the mechanical strength of concrete.
• Easy to apply and does not require large expenditures.

Usage instructions

Before applying the concrete should be cleaned from extraneous substances. The application surface must be isolated from external factors for 24 hours during curing in the open areas. During work use protective gloves, glasses and mask. In case of contact with eyes or skin rinse with plenty of water, and if ingested should immediately contact the doctor.

Notes on application / Limitations

• Mix well before use.
• Spray evenly on a newly-poured concrete.
• The spray devices used during application should be cleaned with warm water.
• The second layer can be applied 6 hours after applying the first layer to provide efficient curing in the open air.
• To obtain the most homogeneous structure it is recommended to apply TEKNOKUR 100 by spraying on the concrete surface.