Epoxy paint Teknobond 600

Directory > The materials for industrial floors

Epoxy paint Teknobond 600

Epoxy paint for concrete, metal, wood and plaster surfaces.

CHECKOUT

Введите свои данные

Teknobond 600 is epoxy paint, resistant to corrosive conditions and chemicals. Can be applied on concrete, metal, wood, plaster surfaces.

To obtain a textured surface should be used Teknobond 600 TIX.

Scope

  • Indoors and in open spaces
  • For any surface that can use chemicals.
  • In food factories, laboratories (especially in areas with high humidity).
  • Used for coating materials such as flooring, tile, ceramic, granite, mosaic, porcelain, glass.
  • Suitable for walls, ceilings and floors.

 

The features and benefits

  • Waterproof
  • Resistant to chemicals and bacteria.
  • Resistant to frost.
  • High strength and durable.

 

Usage instructions

Surface for application must be solid, clean, dry and not to contain extraneous substances. The surface should be as smooth, have no cracks or other damage. If there are areas in the form of cracks and cavities on surface should be repaired using the easy cement mixes Teknorep 300 and Teknorep 300EX.

After adding component B to component A and mix for 2-3 minutes with low speed electric mixer (max 400 rpm) until a homogeneous mixture.

Cleaning of the equipment. Immediately after application equipment must be cleaned with solvent Tekno.

 

Notes on application / Limitations

  • For most high-quality curing of material, do not use the boundary temperature regimes. Low temperatures slow down the curing process, while higher temperatures accelerate the curing process. Viability will also vary depending on the temperature.
  • After application the surface should be protected from direct sunlight, strong wind and high air temperature (above 35° C).
  • If your mixture to the skin it should be washed with water with detergent. In case of contact with eyes, rinse with plenty lukewarm water and seek medical help.

Color

From RAL palette

The density of the mixture

Of 1.54±0.02 g/ml

Shelf life

12 months in unopened original packaging

Packaging

5 – 20 kg set

Consumption

0,250 – 0,300 kg/m2 (one layer)

Mix

40 min. (depends on weather conditions)

Mixture proportions

4.5 part A: 1 part B (by weight)

The bond strength with concrete

> 4 n/mm2 (TS EN 4624)

Full cure

7 days