Paint for road marking Teknobond 950

Directory > The materials for industrial floors

Paint for road marking Teknobond 950

One-component paint based on acrylic resin and solvent for road marking and floor coatings.

CHECKOUT

Введите свои данные

Teknobond 950 - one-component paint for road markings and floor coatings based on acrylic resin and solvent.

Scope

  • Motorway, highway, urban pavement.
  • Airports, bridges.
  • Shopping malls, Parking lots, industrial facilities.
  • Sidewalks, curbs, paving stones.
  • Applied on asphalt and concrete in all types of engineering structures.

 

The features and benefits

  • One-component, easy to apply.
  • Dries quickly.
  • High resistance to abrasion.
  • High resistance to UV radiation.
  • Does not change its color regardless of surface coating.
  • Has reflective properties.

 

Usage instructions

Surface for application must be solid, clean, dry and does not contain extraneous substances and materials that prevent adhesion. Tensile strength shall be not less than 1.5 N/mm2.

If on concrete or asphalt is cracked or cracks, they should be repaired. The paint should be well mixed before use. Deposition is performed in a single layer. If applying a second coat time between coats is 1 hour. TEKNOBOND 950 is cured by air.

 

Notes on application / Limitations

  • After partially used containers should be tightly closed.
  • It should not be used in the rain. To prevent dilution with water.
  • Apply by brush, roller or special installations.
  • To protect the surface from adverse weather conditions such as direct sunlight, strong wind, high air temperature (above 35 ° C), rain and frost.
  • Keep away from sources of ignition, contain solvent.
  • Cleaning of the equipment. Immediately after application equipment must be cleaned with solvent Tekno.

Color

Yellow, white, red (optional)

Packaging

25 kg metal bucket

Shelf life

12 months in unopened original packaging

Density

1,65±0,05 g/ml

Consumption

150±5 g/m2 (one layer)

The viability of the paint mixtures

~ 60 minutes

Viscosity

~ 120 sec (DIN CUP No. 4 DIN 53211)

Gripe

10 - 15 minutes

Resistance to dust

20-30 minutes

Complete drying

~ 3 hours

Application temperature

5 - 35 °C