Flooring Teknobond 500P

A two-component material for floor covering based on polyurethane.

CHECKOUT

Enter your name and phone number

Teknobond 500P two - component material for floor covering based on polyurethane, solvent-free, self-levelling, with high elasticity and mechanical strength.

Scope

  • Factories, warehouses cold storage.
  • Shopping centers, workshops, aircraft hangars.
  • Schools, gyms, hospitals, pharmaceutical and food factories, lab.
  • Parking, Parking lots and in places with heavy traffic of trucks.

The features and benefits

  • High resistance to abrasion.
  • Elastic structure.
  • Easy to clean, hygienic, does not require long-term care.
  • Easy to apply.
  • Does not contain solvents.

Usage instructions

The surface should be made rough with sandpaper, by milling or sandblasting. On the cleaned surface apply a primer coat of TEKNOBOND 300. Teknobond 500P application is made not later than 24 hours after application of the primer layer. Teknobond 500 P should be applied with a spatula to obtain a smooth surface.

After adding component B to component A and mix for 2-3 minutes with low speed electric mixer (max 400 rpm) until a homogeneous color.

Notes on application / Limitations

  • Make sure TEKNOBOND 500 P will be applied to solid non-porous surface. If necessary, double-undercoat layer TEKNOBOND 300. TEKNOBOND 500P is applied with a notched trowel.
  • For most high-quality curing of material, do not use the boundary temperature regimes. Low temperatures slow down the curing process, while higher temperatures accelerate the curing process. Viability will also vary depending on the temperature.
  • If your mixture to the skin it should be washed with water with detergent. In case of contact with eyes, rinse with plenty lukewarm water and seek medical help.
  • After application the product must be protected from direct sunlight, strong wind, high air temperature (above 35 °C) and bad weather conditions.
  • Immediately after application, equipment should be cleaned with TeknoThinner.

Chemical composition

2-component, polyurethane-based

Density

1.3-1.4 kg/l

(TS EN ıso 2811-1)

Packaging

Set 20 kg

 

Consumption

1.4 kg/m2 (for 1 mm cover)

 

Shelf life

12 months in unopened original packaging

 
 

 

Shore A

70-75

(ASTM D 2240) (DiN 53505)

Mixture proportions

4 parts A:1 part B (by weight)

 

The life time of the mixture

30-40 min.

(DiN 16945)

Resistance at the gap

5 N/mm2

(TS 1967)

Abrasive strength

150 mg

(8103 TS EN ISO 5470-1)

Resistance to dust

1-2 hours

(TS 4317)

Resistance to touch

5-7 hours

(TS 4317)

Full cure

7 days

(TS 4317)