The dry additive Powder Teknogunit

Directory > Concrete and concrete products

The dry additive Powder Teknogunit

Dry the accelerating additive for concrete used in shotcrete.

CHECKOUT

Enter your name and phone number

Teknogunit Powder - dry accelerating additive for concrete used in shotcrete.

Applications:

  • all kinds of works on spraying of
  • in the production of high-strength concrete
  • basic parts of tunnels and shafts
  • with the stabilization of the cliffs and slopes

Advantages:

  • increases adhesion of concrete to stone and concrete surfaces
  • increases water resistance
  • does not contain chlorine and does not cause corrosion of rebar

Instructions for use:

The maximum diameter of the fraction of aggregate should not be more than 16 mm. the Ratio of water and binder should not exceed 0,48, the strength of concrete shall not be less than C25. Dosage Teknogunit is from 3% to 7%. The mixing takes place directly before spraying, adding to the dry cement/sand/gravel. Setting time depends on ambient temperature and type of cement mixture.

After pouring, the surface should be protected from adverse weather conditions such as direct sunlight, strong wind, high air temperature (above 35 °C), rain and frost.

Notes on application / Limitations

  • After application clean equipment before solidification of the solution
  • Wear clothing and equipment appropriate to the safety guidelines

Color

Light beige

Shelf life

12 months in dry environment in unopened container.

Packaging

20 kg bag

Application temperature

( 5 °C) - ( 35 °C)

The density of the solution

1,2 ± 0,1 kg/l

Start time setting

75 ± 15 sec

The end time setting

150 ± 30 sec

Consumption

3-7 % (relative to core)

Chlorine

< 0.1 %