Teknobond 250 acrylic glue

Directory > Adhesives and sealants

Teknobond 250 acrylic glue

Water-based acrylic adhesive for PVC and linoleum floor coverings.

4752
uah
x
bucket
=
4752 uah
Wholesale price 4039.2 uah from 10 bucket

For you, there will be a greater sense of the price of the proposition. Be affectionate, send a request and managers create an individual prorachunok for you.

CHECKOUT

Enter your name and phone number

Water-based acrylic adhesive with high adhesion strength for PVC and linoleum floor coverings.

Areas of application:

Hospitals, laboratories, residential buildings, shopping centers.

For fast and long-lasting high-strength bonding:

  • LVT and other coatings in rolls and tiles, including homogeneous and heterogeneous PVC
  • Vinyl, linoleum, and rubber (rubber) coatings
  • Carpet tiles and carpet.
  • Needle-punched coatings
  • Natural linoleum
  • Textile coatings on synthetic and natural substrates (for example, latex, PVC, polyurethane, jute)
  • Quartz-vinyl and cork tiles.
  • On absorbent and non-absorbent indoor surfaces
  • It is used for gluing carpets, covering PVC materials on concrete and screed

Features and Benefits:

  • Simply applied
  • Wide application range and high strength
  • Does not contain solvents
  • Quickly grasps
  • High adhesive capacity
  • Suitable for underfloor heating
  • Resistant to mechanical loads
     

Instructions for use:

Surface quality: The application surface must be free of materials that prevent adhesion, such as dust, oil, resin, and detergent. Weak particles should be removed and the surface cleaned with compressed air.

Surface preparation: If there are irregularities on the floor, they must be removed with a self-leveling screed TEKNOSELF or TEKNOSELF 500. After leveling, if necessary, the surface should be primed with TEKNOLATEX 200.

TEKNOBOND 250 is applied to the surface with a notched spatula. The flow rate is adjusted according to the depth of the trowel teeth. After applying the adhesive composition, it is necessary to wait 2-3 minutes for full adhesion to the application surface to occur and an adhesive film is formed. After that, you can proceed directly to the gluing of the finish coating.

Naimenuvannya ostavnika

             Normativne znachennya

Kolir

Siri

Packaging

Vidro 20 kg

Umovi zberigannya

12 misyatsiv u sukhomu seredovishchi u zakritiy originalniy packatsi

pH

6,5 - 7,5

Vitrata

250-300 g / m2

The hour of life sumishi

45-50 xb

The hour of the Firstfruits

15-20 xb

Hour of vedennya in ekspluatatsiyu

~ 24 years ago

Povne visihannya

3-4 days

Schilnist

~ 1.35 kg / l

Temperature range of the plotted area

( 10 ° C) - ( 35 ° C)

публикации о продукте

How to glue the carpet together
How to glue the carpet together

Teknobond 250 glue reliably strengthens the joints of the carpet, thereby extending the service life of the entire coating.

Read article
A unique novelty-Teknobond 250 acrylic glue
30 Jul 2021
A unique novelty-Teknobond 250 acrylic glue

Water-based acrylic adhesive with increased adhesion strength, designed specifically for gluing floor coverings, such as: natural linoleum, vinyl, linoleum and rubber coatings, carpet, carpet, quartz-vinyl and cork tiles.

Read article
How to glue PVC materials to concrete
How to glue PVC materials to concrete

The simplest and most convenient way to glue PVC materials to concrete is to use a special acrylic glue Teknobond 250.

Read article
Do I need to glue linoleum
Do I need to glue linoleum

Ready-to-use acrylic adhesive Teknobond 250 on a water basis is designed directly for gluing such floor coverings as natural linoleum, vinyl, linoleum and rubber coverings, carpet, quartz-vinyl and cork tiles.

Read article