Adhesive for tiles, marble and granite Teknofay EX

Directory > Adhesives and sealants

Adhesive for tiles, marble and granite Teknofay EX

Adhesive with high strength adhesive for bonding porcelain, ceramic, granite, marble, briquettes, etc.

342
uah
x
bag
=
342 uah
Wholesale price 290.7 uah from 10 bag

For you, there will be a greater sense of the price of the proposition. Be affectionate, send a request and managers create an individual prorachunok for you.

CHECKOUT

Enter your name and phone number

Adhesive with high strength adhesive for bonding porcelain, ceramic, granite, marble, briquettes and other Teknofay EX.

Applications:

  • Applied both outside and inside
  • Used on vertical and horizontal surfaces
  • In homes, shopping centers, office buildings, hospitals
  • Used for gluing of materials with low adhesion, such as tiles, small and medium size, ceramics with the degree of water absorption of more than 3%.
  • For bonding materials such as ceramics, granite, marble and natural granite
  • On balconies and terraces
  • For bonding to the insulating plates and plates made of pumice stone or concrete
  • For the application of gypsum plaster, drywall, concrete and concrete outdoor
  • In places with high humidity such as a bathroom, shower room, swimming pool etc.
  • Used for bonding ceramic and granite on the external facades
  • With Underfloor heating, the heated pools, thermal pools, freezers

 

Features and benefits:

  • Quick to cook and easy to apply.
  • Has high adhesion characteristics.
  • Does not slide in a vertical position.
  • Saves time and labor.
  • Hydrophobic

 

Instructions for use:

Pour 6,8-7,2 l of pure, clean water in a clean container which eliminates all kinds of materials, preventing adhesion. Then slowly fall asleep Teknofay EX in a container filled with water. Mix the material with a low shear mixer to obtain a homogeneous mixture without lumps. The mixture obtained by mixing should be left alone for 5-10 minutes and then stir it for 2 minutes, until it becomes homogeneous.
 

Remarks / Restrictions:

  • The product can irritate the skin. When working with the material it is necessary to use work clothes, protective gloves, mask and goggles.
  • The prepared solution is applied to the surface with a notched trowel with the appropriate size of the teeth.
  • The tiles are placed on the adhesive and pressed within 10 minutes after application.
  • The position of the tiles can be adjusted for about 15 minutes after installation.
  • In case of contact with the glue in eyes, immediately rinse with warm water and contact a doctor.
  • The seams of the lining, it is recommended to fill the grout not earlier than 24 hours after laying the tiles.
  • Work should be performed in dry conditions, when temperature and base 5 to 30 ° C and relative humidity above 80%.

Name of indicator

Standard value

Appearance

Grey powder

Storage in a dry, dark warehouse, subject to temperature range 5 ... 35C humidity above 80%

12 months

Packaging

Bag 5 kg

Temperature range, °C

5... 30

Mixing ratio

6.8 - 7.2 water / 25 kg powder

The life time of the mixture

a minimum of 6 hours

Operating temperature range

(-40 ° C) - ( 80 ° C)

Resistance to slipping

≤ 0.5 mm

Cob mehanni avantajele via

Day 1 - on the floor, 8 hours on STN

Vgcreate hour

≥ 0.5 N / mm2 after 30 min

Mcnasty of cleavage z unity:

After fitriawan in povitryana-dry seredova

≥ 1.0 N/mm2

After fitriawan water seredova

≥ 1.0 N/mm2

After fitriawan have spectemu seredova

≥ 1.0 N/mm2

After Ziklag samorogouan I watana

≥ 1.0 N/mm2

Klas pagina reacts

A1

 

Table consumption

TEKNOFAY EX

Slnti sums

(gr / lt)

Vitrata powder on 1m2

(kg)

Number of VOD for sushumana,l

25 kg kratovil msok

~ 1.80

3-5

6,8-7,2