Polyurethane sealant for joints

Teknpolyderz 1K is a polyurethane one-component elastic sealant for joints, resistant to climatic conditions, ultraviolet radiation. It is characterized by a high level of adhesion to various surfaces, as well as high strength and deformation characteristics after polymerization.

Scope of application:

• On highways and bridge connections
• in construction joints from 10 mm to 35 mm
• On internal and external surfaces
• On horizontal and vertical surfaces
• In buildings, structures and railway structures
• For seams in floors, ceilings and walls
• For building repairs and new construction
• In the construction joints of building elements made of concrete, brick, wood, metal, aluminum and PVC.
• In the joints between prefabricated wall panels

Features and benefits:

• Easy to use
• does not drain, thixotropic
• Single-component
• Highly elastic
• It adheres well to various types of surfaces, such as concrete, stone, metal, wood, PVC and others
• It is resistant to climatic conditions and to UV rays
• Resistant to chemicals
• Before applying to most surfaces, the primer can not be used

Instructions for use:

• The surface should be clean, smooth, hard and dry, weak parts should be removed from the surface. Do not apply to wet surfaces.
• All joints and seams should be thoroughly cleaned with a metal brush and cleaned of dust with compressed air before applying the sealant.
• To prevent smearing of the sealant outside the seams, you should use a paint tape.
• For application, you can use a sealant gun or a special nozzle.

Notes what to use / restrictions:

• Work should be carried out at an ambient temperature of not less than 5 ° C
• Do not use on wet / wet surfaces
• The surface must be cleaned of dirt and other substances before application