Grout for tiles Teknoderz Ex

Directory > Adhesives and sealants

Grout for tiles Teknoderz Ex

Water-repellent elastic polymer grout for grouting ceramic tiles, marble and granite.

222 uah

Введите свои данные

Water-repellent elastic polymer groutused to seal the joints between the tiles, ceramic tiles, marble and granite.


  • Can be used indoors and outside.
  • To fill the joints between ceramic, marble and granite slabs.
  • For grouting of natural granite, pressed brick, marble, glass mosaic and natural stone.
  • For residential, administrative, commercial, and Convention centers.
  • Indoors and outdoors with heavy foot traffic.

Features and benefits:

  • Lasting color.
  • Elasticity.
  • Water resistance.
  • No cracks.
  • Frost.
  • Prevents the formation of mold and mildew.
  • It withstands heavy loads.
  • Has a high resistance to temperature fluctuations.

Instructions for use:

Before the execution of the works on the grout joints between the tiles to ensure full curing of adhesives for tiles. The application should be done not earlier than 24 hours after applying the adhesive. Before applying the material, you must clear all the joints from dirt, dust, glue and other substances that can affect the strength of adhesion of the mortar to the substrate and the ends of the tiles. The width of the joints should be at least 2/3 of the thickness of the used plates. Perform work in a dry and warm weather, at temperatures between 5°C to 35°C. To prepare the solution you need in a container with water, add the dry mixture and mix with a mixer at low speed until blended. To withstand the solution for 5-10 minutes and stir again until smooth for 1-2 minutes. 5 kg dry material must be 1.5-1.6 liters of water.


White, Beige, Gray


5 kg bag

Storage conditions

12 months in closed original packaging

Mix ratio

6 – 6.4 liters of water per 20 kg powder

The life time of the mixture

1 hour

Application temperature

5°C - 35°C


1.8 kg/m2 (thickness of layer of 1 mm)

Ready to use

24 hours

Flexural strength

≥ 2.5 N/mm2

Pressure strength

≥ 15 N/mm2

Wear resistance

≤ 1000 mm3