Acrylic primer Izoplast E Nano Power

Izoplast E Power Nano – hydrophobic primer of deep penetration based on acrylic dispersion. Used for dust control and strengthen the top layer of grounds before applying another material.

Applications:

• the concrete surface
• walls of cellular concrete
• cement and plaster
• drywall and wood (MDF, chipboard etc.) surface

Advantages:

• penetrates deeply into the surface
• reduces water absorption bases
• reduces the consumption of topcoat (paint, waterproofing, etc.)
• you can apply on dry and wet grounds
• can be applied manually or by spraying
• non-toxic, can be applied both outside and inside buildings

Instructions for use:

The surface must be sound and free from dust, dirt and other release agents. If necessary to repair the surface of the relevant materials.

Prior to use mix. Apply to surface with brush or roller. On porous surfaces recommended application in several layers. Each subsequent layer of primer applied without waiting for complete drying of the previous.

At priming of surfaces before applying acrylic paints and/or emulsion - solution Izoplast E Nano Power diluted with water in proportion 1:1.

Remarks / Restrictions:

Observe safety precautions and labour protection during execution of works. Use protective gloves, clothing, glasses. After contact with skin wash with plenty of soap and water. In case of contact with eyes, rinse with plenty of water and seek medical advice.