Bitumen primer Izoplast R

Directory > Materials for waterproofing

Bitumen primer Izoplast R

Bitumen primer to create a thin insulating coatings.

1596 uah
Wholesale price 1356.6 uah from 20 bucket

For you, there will be a greater sense of the price of the proposition. Be affectionate, send a request and managers create an individual prorachunok for you.


Введите свои данные

Izoplast R - a bituminous primer for priming mineral surfaces, protect metal and wooden elements. To create a thin insulating coatings.


  • For industrial and residential construction
  • To impregnate and protect wooden items (fences, poles)
  • To provide protection against corrosion of metal constructions and elements
  • To create a thin waterproof layer
  • To impregnate and protect wooden items (fences, poles, etc.)


  • Resistance to weak acids and salts
  • High penetrating ability
  • Economical rate
  • High adhesion

Instructions for use:

Prior to use mix. Apply paste with a brush or roofing brush. Apply the next layer after drying the previous one. Waiting time before laying the second layer of waterproofing composition Izoplast R is not less than 6 hours. In the presence of cracks (for concrete surfaces) Izoplast R can be diluted with an organic solvent for increasing the adhesion of material to the surface.

For waterproofing of basements and other underground parts of the building: apply 2 to 3 layers on dry primed concrete surface depending on the anticipated water load.

For the restoration and improvement of a sealing covering of roofs: apply at least 2 layers of emulsion on the prepared base. To increase the service life of the coating on the fresh finish layer of emulsion should be applied with mineral aggregate.

Remarks / Restrictions:

Store in tightly closed original containers, inaccessible to children, protected from direct sunlight, sources of heat and ignition. May be transported by any mode of transport.

Work with Izoplast R to hold in calm weather without precipitation at ambient temperatures from 5 °C to 25 °C.

At performance of works observe safety rules when working with organic solvents, the use of efficient ventilation and mask with filter for organic vapours.

In case of poisoning to provide the victim with fresh air, first aid, doctor-on-call.

Do not use Izoplast R inside residential and public buildings, and other facilities intended for permanent residence and finding people. Material must not come into direct contact with food or drinking water.

The product is flammable. Irritating to eyes and skin. Vapours may cause drowsiness and dizziness. Do not breathe fumes. Avoid contact with skin and eyes. Use only in well-ventilated areas.


Bitumen emulsion in organic solvents




A bucket of 20 kg.

Drying time

≤ 8 hours

The density of the emulsion

≤ 0,985 g/cm3

The flow (first layer)

0,3-0,6 kg/m2

Flow (next layers)

0,2-0,5 kg/ m2

Water resistant using

≤ 24 hours

Application temperature

from - 5 °C to 25 °C

The temperature of the fire

200 °C

Dry mass residue

65 %

как сделать гидроизоляцию фундамента?

Product publications

A detailed description of the Izoplast R primer and mastic Izoplast B
A detailed description of the Izoplast R primer and mastic Izoplast B

Apply a bitumen-rubber primer Izoplast R and bitumen-rubber mastic Izoplast B best in tandem.

Read article
Bitumen primer Izoplast R

Other products