Hydrophobizator Teknosil W

Teknosil W - water-repellent material of white color based on the siloxane, which impregnates the surface of construction elements, protecting them from external factors. After application, surfaces water-repellent properties.

Applications:

• The siding of the facade of the buildings.
• On vertical surfaces.
• On surfaces which are less absorbent: concrete, marble, granite, slate.
• On porous surfaces : brick, colored brick, concrete, travertine.
• Used for protection against atmospheric influences of historical monuments.

The features and benefits

• Material of white color with high penetrating power.
• Reduces the negative impact of the atmosphere.
• Resistant to alkalis and UV rays.
• Water-based.
• A vapor-permeable material.
• Construction keeps items dry, increasing the strength characteristics.

Instructions for use:

1. The surface must be dry, sound, clean, without any dust, oil, dirt, rust, mold, which prevent the penetration of the material.
2. If the surface has cracks or grooves, they must be repaired with appropriate repair solutions Technorep. Apply TEKNOSEL after repair should be in 3-4 days.
3. The material is ready for use, should not be added any foreign matter.
4. When applying the first layer of material is applied with roller, brush or spray, suitable for dry surfaces for maximum penetration. The second layer should be applied after about 4 hours. For porous surfaces it is possible to apply another layer .
5. After application it should be protected from adverse weather conditions such as direct sunlight, strong wind, high air temperature (above 35 ° C), rain.
6. Immediately after application equipment must be cleaned with water before it solidifies. After the product has hardened, it should be cleaned by mechanical methods.

Remarks / Restrictions:

• Follow the safety regulations. Use gloves, masks, goggles when using the product.
• To avoid contact with skin and eyes.
• Do not apply on PVC and metal surfaces.
• Do not add foreign substances in the material.