Polyurethane waterproofing resistant to UV rays Teknomer 600 1K UV

Directory > Materials for waterproofing

Polyurethane waterproofing resistant to UV rays Teknomer 600 1K UV

A one-component polyurethane waterproofing compound resistant to UV rays.


Введите свои данные

Teknomer 600 1K UV is a one-component liquid elastic polyurethane waterproofing compound on a water basis, resistant to UV rays, which cures due to reaction with moisture in the air.

Application areas:

  • For external use
  • For terraces, roofs, balconies and drains
  • For building foundations
  • For wood and sheet materials

Features and Benefits:

  • Protects the surface from UV rays
  • Retains elasticity at low temperatures
  • Does not crack
  • Waterproof
  • Frost - resistant
  • Prevents carbonation in concrete
  • Easy to use, leaves no joints when applied
  • Ready for use

Instructions for use:

  • Before applying the material, the surface should be cleaned of any types of oil, rust, detergents, dirt and other substances that prevent setting.
  • If there are cracks or other damages on the surface, they must be previously repaired with Teknorep repair solutions. Use Tekomer 600 1K UV 3-4 days after surface repair.
  • Before using Teknomer 600 1K UV joints should be worked with Teknomer pah bandi insulation tape.
  • All gutters, drains and filters should also be insulated with an insulating tape.
  • Next, apply Teknobond 300 epoxy primer with a brush or roller, the consumption of which is 0.200 - 0.400 kg / m2.  Consumption depends on the quality and absorbency of concrete. You should wait until the primer dries (from 4 to 24 hours) and you can start applying Teknomer 600 1K UV.
  • The material can be applied with a brush with stiff bristles, roller or spray in two layers, and the second layer should be applied perpendicular to the previous one.  After applying the layer, you should wait at least 1 hour before applying the next one. The layer is considered dried when it ceases to be imprinted on the fingers.

Application Notes/Restrictions:

  • Do not use Teknomer 600 1K UV during rain.
  • Immediately after applying waterproofing, it is necessary to protect the surface from adverse weather conditions (direct sunlight, high temperatures < 35 C, precipitation and frost).
  • Work should be carried out in compliance with safety and hygiene standards, using a mask and glasses.
  • The tools and equipment used must be washed immediately after use.
  • Do not apply Teknomer 600 1K UV during rain.
Colour White
Packaging Bucket 20 kg 
Expiration date 12 months in a dry environment in a closed package
Life time of the mixture 1 hour at a temperature of 20 °C
Density of the mixture 1,35 0,05
Expenditure 1.20 - 1.50 kg/m2
Commissioning 16 - 24 hours at a temperature of 23 °C (for hiking loads)
Solid matter ratio ~ 80
Shore Hardness 65 (7 days)
Breakout strength > 1.5 N/mm2 (7 days)
Tensile strength > 600% (7 days)
Penetration into cracks > 5 mm
Moisture resistance 5%

Product publications

High-quality water-based polyurethane waterproofing compound - Teknomer 600 1K
14 Dec 2021
High-quality water-based polyurethane waterproofing compound - Teknomer 600 1K

With the help of our new product from the Turkish manufacturer Tekno - waterproofing Teknomer 600 1K (Teknomer 600 1K UV) - you will qualitatively and for many years protect the terrace, open balcony, roof, etc. not only from moisture destruction, but also from UV rays.

Read article
Is it possible to make waterproofing without finishing coating
Is it possible to make waterproofing without finishing coating

Teknomer 600 1K UV waterproofing polyurethane mixture is characterized by excellent elasticity, which persists even at low air temperatures, and is also resistant to UV rays, temperature changes, chemicals and acids.

Read article