Teknoplug hydraulic seal

Directory > Materials for waterproofing

Teknoplug hydraulic seal

Repair kit for quick stop active water leaks.

498 uah
Wholesale price 423.3 uah from 10 bucket

For you, there will be a greater sense of the price of the proposition. Be affectionate, send a request and managers create an individual prorachunok for you.


Введите свои данные

Teknoplug - quick-setting repair compound based on special cements and chemical additives to instantly stop active water leaks, installation and repairs.


  • basements, Elevator pits
  • highway, metro, tunnels, dams
  • reservoirs, swimming pools, potable water tanks
  • used for fastening metal anchors and fasteners.


  • easy to use for quick repairs
  • for fastening metal anchors and fasteners
  • instant adhesion after contact with water
  • environmentally safe
  • high adhesion to surface
  • high water resistance, frost resistance, strength

Usage instructions

Surface for application should be cleaned from any oils, rust, detergents and other substances that prevent adhesion. Material Teknoplug is a dry mix that must be mixed with water in the ratio of 270 ml per 1 kg of the composition to a plastic state.

At high temperatures or slow setting material closes with cold water. At low temperatures, or to speed up the process of setting — closes with warm water 40 degrees . The solution should be mixed manually in a small amount to use within 1 minute Giving it the necessary form, you need to wait until the composition starts to set, but it needs to maintain flexibility. You must lay the mortar in the repair area and hold it until it stops leaking. If leak occurs with large openings, the sealing process takes place in several similar stages.

When mixing and applying, use gloves. After applying Teknoplug - the surface must be applied Teknomer 100 for absolute waterproof protection.



Application temperature

5°C - 30 °C


Bucket 3 kg


270 gr. of water per 1 kg powder

Shelf life

6 months in unopened original packaging


A maximum of 1 minute

Material consumption

~ 2 kg / 1000 cm3

Full curing time

2 minutes

Teknoplug hydraulic seal

Other products