Washer made of galvanized steel used in conjunction with the tightening screw and washer.
Washer for tightening screw is an important element of the fastening system of formwork for monolithic construction. Used in conjunction with the tightening screw and washer. The product is made from high strength steel with a galvanized coating.
Advantages
Recommendations for the use of
The puck is placed on the tightening screw on the outer side form formwork between the shield and nut. This element is intended for repeated use.
Hole diameter, mm |
Plate thickness, mm |
17 |
3 |
24 |
5 |