Epoxy primer Teknobond 100

Teknobond 100 two - component epoxy primer.

Scope

• For interior and exterior use
• Protective coating for industrial concrete surfaces
• Warehouses, factories, Parking lots

The features and benefits

• Has very good adhesion to concrete or cement screed.
• Resistant to diluted acids and dense alkalis, cleaning detergents.
• Vegetable, mineral and animal oils, fresh water and sea water, diesel oil, gasoline, alcohol and many solvents.

Usage instructions

• To use at ambient temperature of 10 °C - 30 °C.
• Mixing should be carried out with a mixer at a speed of 300-400 Rev/min. do Not mix by hand.
• Teknobond 100 is supplied ready in perfect proportions. Before mixing pre-prepare the components A and B to a temperature of 15°C - 25°C. Pour the entire contents of component B into the container of component A; make sure that the packaging of component B left in the product. After mixing Teknobond 100 for 3 - 4 minutes, pour the mixture into a new container, leave it for a while and mix for another minute.

Notes on application / Limitations

• Spillage on the skin should be washed with water with detergent.
• The product can irritate the skin. Use protective gloves and goggles. In case of contact with eyes, immediately wash out with warm water and seek medical help.
• Flammable material should be done at a great distance from open flames, high temperatures, welding and cutting machines and tools.