Epoxy paint for concrete, metal, wood and plaster surfaces.
Teknobond 650 is epoxy paint, resistant to corrosive conditions and chemicals. Can be applied on concrete, metal, wood, plaster surfaces.
Scope
The features and benefits
Usage instructions
Surface for application must be solid, clean, dry and not to contain extraneous substances. The surface should be as smooth, have no cracks or other damage. If there are areas in the form of cracks and cavities on surface should be repaired using the easy cement mixes Teknorep 300 and Teknorep 300EX.
After adding component B to component A and mix for 2-3 minutes with low speed electric mixer (max 400 rpm) until a homogeneous mixture.
Cleaning of the equipment. Immediately after application equipment must be cleaned with solvent Tekno.
Notes on application / Limitations
Color |
From RAL palette |
The density of the mixture |
1.2 g/ml |
Shelf life |
12 months in unopened original packaging |
Packaging |
20 kg set |
Consumption |
0.5 kg/m2 (one layer) |
Mix |
60 min (depends on weather conditions) |
Application temperature |
5 °C - 35 °C |
Operating temperature |
-20 °C - 60 °C |
Mixture proportions |
4.5 part A: 1 part B (by weight) |
The bond strength with concrete |
> 4 n/mm2 (TS EN 4624) |
Full cure |
7 days |