The water based lacquer Teknocila 400

Directory > The materials for industrial floors

The water based lacquer Teknocila 400

Acrylic lacquer in white on a water-based acrylic for concrete.


Введите свои данные

Teknocila 400 is a highly efficient surface protection in white color on water-based acrylic, it has been specially developed as the top layer of the lacquer material.


  • To protect some decorative floor and wall coatings.
  • Alternatively, in places where the use of concrete polishing with the solvent is not required.


The features and benefits

  • Extends the life of concrete pavements.
  • Water resistant.
  • Resistant to many oils and chemical elements.
  • Increases the wear resistance of the surface.
  • One-component.
  • Does not contain solvents.
  • Used as a varnish due to the formation of bright film layer.
  • The cleaning can be made with water after application since the product is water-based.


Usage instructions

TEKNOCILA 400 is ready for use, apply on surfaces that have been fully cured. Apply with brush, roller, sponge or sprayer in two layers. Stir the product before use! Application tools should be cleaned with water immediately after use. The ambient temperature and the surface for application should be at least 5 ° C during application and within the next 24 hours.


Notes on application / Limitations

  • May cause irritation in contact with skin. Use protective gloves and goggles.
  • In case of contact with eyes, immediately flush eyes with warm water and seek medical help.
  • For resistance to water apply more than 2 layers.


White liquid


1,03±0,03 g/cm3


Emulsion based acrylic


Metal bucket with 10 and 30 l

Shelf life

12 months in unopened original packaging

Drying time

Complete drying and curing: 7 days

Pause between coats: 2-3 hours

Temperature range of application

( 5°C) – ( 35°C)


O,1 -0,15 l/m2