Decorative plaster Granito Wall

Directory > The materials for industrial floors

Decorative plaster Granito Wall

Cement-based facing material to create a beautiful decorative coating.

1458
uah
x
bag
=
1458 uah
CHECKOUT

Enter your name and phone number

Granito Wall is a cement–based finishing material, which includes special chemical additives. The material is used to create a beautiful decorative coating.

Application areas:It is used in decorative design for finishing walls and ceilings indoors.

  •  
  • It can be applied to mineral surfaces such as plaster, concrete, old painted surfaces, gypsum plaster and drywall, subject to prior use of Granito Astar primer.
  • It can be used in rooms with high humidity (bathrooms, kitchens), provided that all work is done correctly according to the instructions for use.

Properties of decorative plaster:Perfectly complements the interior

  •  
  • You can create an imitation of natural stone
  • Ensures the integrity of the effect when using the material together with Granito Floor for decorative finishing of indoor floors
  • It can be applied to the surface without cleaning it from the previous coating
  • Leaves no seams on the surface
  • Elastic
  • It is possible to obtain any desired surface color by adding a dye for cement mixtures when mixing the material
  • Vapor permeable. Moisture does not pass inside, but those vapors that have accumulated inside the room evaporate
  • When applying Granito Cila varnish over decorative plaster, a waterproof surface is created

Instructions for use:Before applying the material, the surface should be cleaned of any types of oil, rust, detergents, dirt and other substances that prevent setting, and also clean the surface of old and swollen layers of paint.

  • Old synthetic-based surfaces should be thoroughly sanded and the grinding dust should be removed from the surface.
  • If there are cracks or cavities on the surface, they should be sealed with a repair mixture Teknorep 300.
  • To prepare the working solution, pour water into a clean container and pour out dry powder, if necessary, you can add a special dye. Using a low-speed mixer, knead the composition until a homogeneous mass is obtained. The amount of water to mix may vary depending on the ambient temperature. Leave the resulting mixture for 1-3 minutes, then re-mix the mixture.
  • Granito Wall is applied to the surface in 2-3 layers with a steel spatula, maintaining a pause between layers in 12-24 hours. The total thickness of the application should be 2-4 mm.
  • The pattern is created with a special steel trowel for decorative plaster when applying the top layer of the coating or any other convenient method of applying a finishing decorative coating.
  • After the material dries, it is recommended to apply Granito Cila varnish to the surface to give water resistance.

Notes:When applying a ceramic-coated material, the surface should be reinforced with a mesh.

  •  
  • Before using the material, mix the dry mixture well.
  • The surface must be protected from water for one day after applying decorative plaster. Do not clean the surface with abrasive materials.
Colour White, grey
Expiration date 12 months in a dry environment in a closed package
Packaging 20 kg bag
Application temperature 5 °C -  35 °C
Life time of the mixture 30 minutes
Thickness of application 2 - 4 mm
Layer solidification time  3-4 hours
Expenditure 1.00 - 1.20 kg/m2 (with a layer thickness of 1 mm)
Compressive strength (TS EN 12190)

> 12 N/mm2 after 7 days

≥ 20 N/mm2 after 28 days

Flexural strength (TS EN 1015-11)

Pislya zakinchennya 7 dniv min. 4 N/mm 2Pislya zakinchennya 28 dniv min. 8 N/mm 2

Dry saturated density (TS EN 1015-10)

  1350±100 kg/m3Adhesion to concrete
  > 1.5 N/mm2
Heat resistance - 30 °C -  80 °C
Fire resistance class (EN 13501-1) A2
Joint strength – form of rupture (TS EN 1542)

After the end of 28 days min. 1.50 N/mm2